1.Suitable for both pouring molding and brushing molding
2.Strong tear strength and tensile strength
3.Excellent non-stick effect
4.Easily release air to avoid bubbles
5.Various hardness from 0 to 35 shore A
6.Excellent flexibility, easy to demould
7.High temperature resistance, high duplication times and repeated use
8.Good cut-growth resistance
| Item | Parameter | ||||
| C-825 | |||||
| Viscosity(cps) | 20000±500 | ||||
| Hardness(A°) | 25±2 | ||||
| Tensile Strength(kgf/cm²) | 40±2 | ||||
| Tear Strength(KN/M) | 24±1 | ||||
| Elongation(%) | 450±50 | ||||
| Shrinkage Rate(%) | 0.3% | ||||
| Mixing Ratio | 100:2 | ||||
| Life Time(Min) | 20~30 | ||||
| Curing Time (hr) | 2~3 | ||||
| Temperature(℃) | 25 | ||||
Making molds for
Artificial stoneproducts molding,Waxcasting
Lighting & candles crafts,stationery gifts,crafts industry
Making molds for gypsum,GRC,concrete,resin products etc
Casting for Statue,Buddha,Christmas ornaments,sculptures,figures etc
Unsaturated rein crafts,epoxy resin crafts, poly resin crafts,polyester resin
Decoration building mold making (cornice,column, balustrade, ceiling, pedestals,fountains, mantels, wall
ornament, planter,furniture decorative etc.)
Step One: Prepare and clean the prototype. You must make sure your original moulds perfect.
Step Two: Mixing part A and part B evenly. Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Three: Vacuum pumping. Without exception, this step takes less than 10 minutes. Otherwise, it will cause a cross-linking reaction, and no further steps will be available.
Step Four: Pouring cast or brushing cast. After released the bubble, we can pour/brush the silicone rubber on the prototype
Pouring cast:
It is suitable for simple products with a smooth surface. Without any mould lines, which helps you save time and is easy for operation. Evenly and slowly pouring the mixed silicone rubber into the square frame. After the cross-linking reaction and the silicone rubber turns dry, you can take the products out. Thus, the mould has been done.
Brushing cast:
1. It is a kind of non-dangerous goods. This product should be sealed and placed in a cool and dry place which should keep from sunlight and rain .
2. The shelf life is 12months from the date of production.
It can be reused after reinspection when it exceeds the storage period.
The artificial stone silicone rubber is light viscosity and good flowability for easy-operation .It is low shrinkage
,favorable tensile and tear strength ,high temperature resistance ,acid and alkali-resistance for molds casting
good price liquid mold making rtv2 silicone for polyester resin molds 
: sunnyzhousan
: 86-13925729510
: 86-13925729510
: